Price List · Nov 2026
Building Material Price List in Chennai (Updated November 2026): Cement, Steel, M-Sand & More
Price List at a Glance (November 2026)
| Material | Unit | Indicative Chennai price |
|---|---|---|
| OPC 53 grade cement | 50 kg bag | ₹405 – ₹430 |
| OPC 43 grade cement | 50 kg bag | ₹380 – ₹405 |
| PPC cement | 50 kg bag | ₹380 – ₹425 |
| TMT steel Fe500D, 8 mm | per kg | ₹61 – ₹67 |
| TMT steel Fe500D, 12 mm | per kg | ₹59 – ₹65 |
| TMT steel Fe500D, 16 – 25 mm | per kg | ₹58 – ₹64 |
| M-sand (concrete / masonry) | per tonne | ₹1,200 – ₹1,500 |
| P-sand (plastering) | per tonne | ₹1,400 – ₹1,800 |
| River sand | per tonne | ₹2,400 – ₹3,000 |
| Red clay bricks | each | ₹7 – ₹10 |
| Fly ash bricks | each | ₹5 – ₹7 |
| AAC blocks (600 × 200 × 200 mm) | each | ₹44 – ₹54 |
| Ready-mix concrete M25 | per cubic metre | around ₹6,000 |
| Vitrified tiles 2×2 ft | per sq ft | ₹32 – ₹75 |
Prices are indicative market ranges for Chennai and vary by brand, dealer, quantity and delivery distance. GST, unloading and transport may be extra. Always confirm a written rate before ordering.
Cement: OPC or PPC?
- OPC 53 gains strength fast and suits columns, beams and slabs where early strength matters.
- PPC gains strength more slowly but gives better long-term durability and lower heat, making it a good choice for plastering, masonry and foundations in Chennai’s humid, coastal climate.
Many builders use OPC for structural concrete and PPC for masonry and plastering. Whatever you choose, use cement within about three months of manufacture, store it off the ground under cover, and check the manufacturing date on the bag.
TMT Steel: What to Check
- Grade: Fe500D or Fe550D for houses. The “D” means better ductility, which matters for safety.
- Brand and BIS mark on every bar.
- Weight: insist on a weighment slip. Steel is sold by weight, so short weight is the most common way buyers lose money.
- Storage: keep bars off the ground and covered to prevent rust, especially near the coast.
Premium brands cost more than the ranges above; mid-range BIS-certified brands are perfectly good for most homes when the design is right.
Sand: M-Sand, P-Sand or River Sand?
River sand is now expensive and harder to get, so most Chennai sites use manufactured sand:
- M-sand for concrete and brickwork. Check that it is washed, well graded and low in dust.
- P-sand (finer grade) for plastering, giving a smoother finish.
A quick silt test on site (shake sand in water in a glass and check the layer that settles on top) helps catch dusty, poor-quality loads.
Bricks and Blocks
- Red clay bricks: traditional, strong, good thermal mass.
- Fly ash bricks: uniform size, less plaster needed, eco-friendly and cheaper per piece.
- AAC blocks: large, light and insulating. Costlier per piece but one block replaces several bricks, so compare by wall area, not unit price.
How Much Material Does a House Need?
As a planning rule for a standard RCC-framed house in Chennai, per sq ft of built-up area:
| Material | Per sq ft | For 1,000 sq ft |
|---|---|---|
| Cement | 0.50 – 0.55 bags | 500 – 550 bags |
| TMT steel | 4.5 – 5.5 kg | 4.5 – 5.5 tonnes |
| Bricks | 1.1 – 1.3 standard bricks | 11,000 – 13,000 |
Your structural design decides the actual quantities, so use these figures only to sanity-check a quote.
Tips to Avoid Overpaying
- Buy stage by stage instead of stocking months of material on site.
- Get written quotes from two or three dealers for the same brand and grade.
- Check weight for steel and count for bricks on delivery.
- Ask whether the price includes GST, loading, unloading and transport.
- Plan big purchases ahead of the October – December season, when demand and prices often rise.
Let Us Handle Materials for You
Our building material and labour contract service supplies quality-checked cement, steel, sand, bricks and labour under one contract, with fair weights and stage-wise delivery. For full budgets, see our construction cost per sq ft guide, or call +91 90032 36012.
Frequently Asked Questions
What is the cement price in Chennai today?
In November 2026, OPC 53 cement in Chennai is about ₹405 – ₹430 per 50 kg bag, OPC 43 about ₹380 – ₹405 and PPC about ₹380 – ₹425, depending on brand and dealer.
What is the TMT steel rate per kg in Chennai?
Fe500D TMT bars cost about ₹58 – ₹67 per kg in Chennai, depending on diameter and brand. Premium brands cost more.
What is the M-sand price in Chennai?
M-sand costs about ₹1,200 – ₹1,500 per tonne and P-sand about ₹1,400 – ₹1,800 per tonne. River sand is costlier at about ₹2,400 – ₹3,000 per tonne.
How many cement bags are needed per sq ft?
About 0.50 – 0.55 bags per sq ft of built-up area for a standard house, so roughly 500 – 550 bags for 1,000 sq ft.
Which is better for a house, M-sand or river sand?
Good-quality washed M-sand is widely used and suitable for concrete and masonry, with P-sand for plastering. Quality and grading matter more than the type.
Free site visit & estimate
